Now the question is, what are the best Angle Grinders you can choose from, and what qualities should one look for? To get answers to these questions, let us walk you through the best options for Angle Grinder available in the market and tell you the qualities one should consider before buying it.
What to Consider When Picking the Angle Grinder?
Before purchasing the right Angle Grinder, one must consider some points. Every Angle Grinder is different based on its power, reliability, and uses. Below is a list of factors worth considering while picking a good quality grinder.
-
Size Of Disk
Every Angle Grinder comes in a series of sizes indicated by a digit that denotes the highest diameter of the grinding disc or wheel it can handle. A 4-, 4.5-, or 5-inch disc prefer for most DIY projects. In fact, these disc sizes are ideal for DIYers, as big Grinding discs can become tedious or unhandy to work with.
The larger grinding disc (about 9 inches) are used in industrial areas by professionals to cut thick material. With the larger disc, the Grinder should also be larger enough to manage the cutting strength.
-
Power Source
The two primary power sources in which the Angle Grinders are available are the Corded and Cordless models. Corded Grinders release more power due to the direct outlet attachment but limit the person to a specific site, restricting reach without an extra cord. These wires can also be a tripping risk and, thus, an inconvenience while performing a project.
In contrast, Cordless Grinders have a shortage of the whole power of their corded equivalent. And their functionality depends on the capacity of a battery, which is why a dead battery could have downtime while performing the project. But their plus point is that they provide hassle-free movement and are ideal for tight spaces.
-
Amperage & Voltage
The Angle Grinders calculate power output potential in two measuring units – amperes (amps) and volts (V). The cordless model of the Angle Grinder uses a volt for power measurement accessible from their battery. The popular digits in most cordless power equipment start from 18 volts to 20 volts. They offer the best combination of functionality and affordability.
The Corded Angle Grinderās Voltage reading indicates if it can be applied with 120-volt and 220-volt power channels. Buyers can estimate the corded modelās power output potential by evaluating the amperage ranging from 5 amps to 15 amps.
-
Speed
The speed of the Angle Grinder is measured in units called revolutions per minute (rpm). The Angle Grinder scales between 5,000 and 10,000 rpm. But, some robust or tough Grinders extend to 12,000 rpm. Remember that the rpm grading works under the āno loadā condition, meaning that if the disc isnāt grinding or cutting anything, it hangs in the air. And once the disc starts cutting, its speed reduces.
The theory shows that the tool can grind easily by the target material if the rpm gets higher. Also, with the high speed, the disc can become hotter and broken, causing injury hazards. Thus, always check the highest supported speed labeled on the disc and use the appropriate disc for the task. For instance, a disc with a 7,500 rpm speed rating can crack under pressure, sending pieces of the grinder wheel fluttering.
-
Grinder Guard
The Angle Grinderās Guard is a key security meter shielding half of the disc. It aims to secure the personās hand by averting debris and sparks from fluttering toward the person. Also, it safeguards the exterior from destruction while using the Grinder in compact areas.
Few Angle Grinders have a mobile guard, while others have fixed guards. The mobile Guard is a much more popular option than the fixed ones as it allows both right & left-handed use and protects the person from debris. A mobile guard may fall off the unit if the guards leave untightened. On the other hand, the fixed guards are much harder and more robust; in their case, they are not likely to fall off a Grinder.
-
Soft Start
As the Angle Grinders are fast and powerful tools, they can start upon power-up. This is certainly true only if the grinding disc is big and hefty. The Angle Grinder can jump in the userās hands and cause severe injury if it recoils from the motor.
To tackle recoil, soft-start technology first lowers the power result to the motor, growing until the angle grinder is at its maximum speed. This smother regulation over the power output stops an angle grinder from recoiling at the start improving security while lowering the bump in the userās wrists and arms.
Best Angle Grinders To Buy
The essential tool that comes in use for grinding and cutting purposes is Angle Grinder. Following is the list of tested and standard 11 best Angle Grinders to add to your toolbox.
-
Genesis GAG645 Angle Grinder
The Genesis GAG645 Angle Grinder activates by a 6.0-Amp motor and has a devised aluminium gear casing for longevity. It also has a firm barrel handle with a soft grip for easy handling and comfortable use.
For user convenience, the supporting handle of this Grinder installs on either side of the casing. Also, its slide button characterizes by a lock-on feature that extends its use.
-
Makita GAG01M1 40V Max XGT Brushless Cordless Angle Grinder
The Makita GAG01M1 is 40V Max XGT Brushless Cordless Angle Grinder that comes with GAG01M1 Electric Brake. It delivers cordless Grinding performance for most challenging uses. This Makita Angle Grinder delivers 8,500 RPM for hefty load and extended speed and power, and its GAG01M1 provides up to 60% faster Grinding speed. It is also potent to cut or grind various materials, including pipe, concrete, conduit, tile, and many more. When it gets used with heavy applications, its electric current limiter supports and protects the motor from overloading.
Other than that, it also features Automatic speed-changing technology that adjusts Grinderās torque and speed during functioning for the best performance. Also, its additional features include an electric brake and AFT ( Active Feedback-sensing Technology).
Also Read: Reliable Building Supply In NYC: Safety Hardware Store
-
Bosch GWS10-45PE Angle Grinder
The Bosch GWS10-45PE Ergonomic Angle Grinder features a slender grip zone for full-time control and comfort, integrated with a high-powered 10-amp motor. This Angle Grinder delivers up to 11,000 no-load rpm for the highest results in cutting and grinding uses. It weighs about 4.4 Lbs and has a Multi-grip blade switch to offer good grip choices for better comfort, ergonomics, and control. Also, this Angle Grinder is very durable with double-sealed bearings, epoxy-plated field windings, and direct-motor cooling. And this Grinder features twisted slant gears for easy power transmission.
Moreover, it has an additional handle and a flexible tool-free guard with many fixed settings. It allows the user to place the Guard at different operating angles.
-
DeWalt DCG416B 20V Max FLEXVOLT Brushless Paddle Switch Angle Grinder
The DeWalt DCG416B 20V Max FLEXVOLT Angle Grinder comes with a brushless paddle. It delivers 1550 max watts up to 9000 rpm, and it has 54% more power when connected to a Flexvolt battery. The Grinder has Kickback Brake employed with the highest force to rapidly stop the wheel and close off the Grinder while binding up. Also, the Grinder is suitable with all DeWalt 20V MAX and Flexvolt batteries, such as the inner flange, wrench, outer flange, and Type 27 guard.
-
Makita XAG25Z 18V LXT Brushless Lithium-Ion Cordless X-Lock Angle Grinder
The Makita XAG25Z 18V LXT Brushless Cordless X-Lock Angle Grinder features X-LOCK Technology, a quick-change structure for tool-free disc changes. A pull release and click-mount lever make changing wheels easy. The Grinder is used to cut varieties of materials and metals, including concrete, tile, consult, pipe, and more. The durability of the Makit-powered XAG25Z is longer and is useful in increasing the speed and power of the Grinder.
Other than that, its BL Brushless Motor remove carbon brushes and allow the motor to work smoothly and efficiently for longer life. Also, the AFT ( Active Feedback-sensing Technology) switches off when the rotation speed suddenly gets slows or the disc is forced to stop.
-
Makita 9557PBX1 4-1/2ā³ Angle Grinder
The Makita 9557PBX1 4-1/2ā³ Angle Grinder merges 7.5 A power with motor protection and comfort features for long-lasting commercial operations. The 9557PB angle grinder transmits 11,000 rpm using a soft start for a smooth beginning. Also, it features a scale of durability properties covering labyrinth construction to shield the bearings and motor from debris and dirt for the toolās extended life.
Besides that, its extra-large blade switch allows easy operation, and its lock-on or off feature supports continuous functioning. The 9557PB is easy to install on any side of the tool because of its light weight of about 4.5 lb. And its toolless adjustment of the disc guard offers convenient clamping.
-
BDEG400 Black & Decker Angle Grinder
The BDEG400 Black & Decker Angle Grinder is ideal for cutting, rust removing, sharpening, grinding, and more. This 4-/2 in tiny Angle Grinder can hold up to Complicated jobs. Its 2- sided handle offers additional control and comfort while you perform, and the Metal gear case for longer life and durability.
2- sided handle offers extra control and comfort, and a slide switch for convenient use. Moreover, the Grinder has a Contoured body grip with a Spindle bolt for easy accessory changes.
-
DWE402K DeWalt Angle Grinder Kit
The DWE402K DeWalt Angle Grinder Kit has an 11-Amp ACDC 11000-rpm motor with a Dust elimination system. It gives the system longevity by eliminating debris and dust particles from the tool. This Angle Grinderās oversized brushes give longer brush life than its previous model ( D28402), and its big twisted bevel gear is durable too.
Besides this, its One-Touch GuardGuard allows 360-degree guard rotation at once, and a Paddle switch with a protective lock-off stops accidental start-up.
-
SKIL 9295-01 Angle Grinder
The SKIL 9295-01 Angle Grinder has a high-power 6.0 Amp Motor with 11,000 RPM and Tool-less guard for fast adjustments. It has Heavy duty metal gear covering for additional durability and ruggedness, and its firm grip pattern allows control and comfort. Moreover, it features a Vibration-lowering handle with wrench storage.
-
DeWalt DWE402 Angle Grinder
The DeWalt DWE402 Angle Grinder has a 13.0 Amp/2.3 HP, 9,000 RPM motor built for quick material removal and maximum load protection. Its Dust Ejection System offers longevity by eliminating debris and dust particles that enter the tool by the air intake channel. Its Quick-Change Wheel Release supports the removal of the tool-free wheel and motor build for the quickest material removal and extended overload security.
Conclusion
Angle grinders are flexible power tools used in residential and industrial projects such as carving wood, cutting iron pipe, eliminating grouts from tiles, replacing a damaged valve, and more. Those who require the best Angle Grinder for grinding and cutting metal and wood can consider buying it from Safety Hardware. We offer tons of high-qualitative Angle Grinders of different purposes and properties. Visit our site to order Angle Grinder and more info; contact us at 212-860-2219 and [email protected].