Command Large Towel Hook allows you to keep towels or robes off the floor, and hung up neatly so that they can dry in between uses. The hook sticks to many surfaces, including glass, mirror, tile, fiberglass, wood and painted surfaces. It is easy to apply and comes off leaving no holes, marks, sticky residue or stains. Repositioning is easy with assorted water resistant refill strips. Great for bathroom organization including guest and kids’ bathrooms, renters and dorm life!
|Units in Package||1|
|Directions||To Apply: 1. Select location. If possible, choose a location where strips are not over grout lines. Important: Allow space above hook for removal. 2. Clean & dry surface. Clean surface with isopropyl rubbing alcohol, let dry. Do not use household cleaners to prep the surface. Separate strips. Top rack dishwasher safe. 3. Remove blue liner. Press adhesive to mounting base of hook. 4. Remove black liner. Press hook to surface for 10 seconds. 5. Important: For maximum holding strength slide hook off. 6. Press base firmly for 30 seconds. 7. Slide hook on to mounting base. 8. Wait 1 hour before use. To Remove: 1. Slide hook up to remove from mounting base. 2. Never pull strip towards you. Strip could break or damage surface if pulled outward. 3. Hold base gently to prevent base from snapping fingers. Do not press base against wall. 4. Stretch strip straight down along wall at least 15 inches until base and strip release. Important: Failure to follow instructions carefully may cause damage! Save instructions for damage-free removal or visit command.com. Note: Apply to surfaces above 15 degrees F. Adhesive could lose adhesion above 125 degrees F. Towel hook can be reused with blue Command large water resistant strips.|
|Warnings||Caution: Do not use with wallpaper. May not adhere well to vinyl surfaces. Do not use for antiques, heirlooms, or other valuable or irreplaceable items. Do not hang items over beds. Use only one hook per item hung.|